Stainless Steel Sanitary Pneumatic Reversal Valve Divert Seat Valve/Stainless Steel Valve

• Customization: Available
• Media: Water
• Temperature: Low Temperature
• Model NO.: CY-PRV01
• Actuator: Pneumatic
• Material: Stainless Steel
• Application: Reversing Valve
• Working Temperature: -10~120 Degree Celsius
• Connection Method: Welding, Clamp, Thread, Flange
• Maximum Working Pressure: Less Than or Equal to 10bar
• Supply Compressed Air: 4-8bar
• Compressed Air Connection: Air Pipe Joint G1/8"
• Contact with Material: SS304/SS316L
• Internal Surface Contact Product: Less Than or Equal to 0.8um
• Transport Package: Shring Wrap,Carton Cases,Exporting Plywooden Case
• Specification: 1/2"~4" or DN10~DN100
• Trademark: eraval
• Origin: China
• HS Code: 8481804090
• Production Capacity: 10000pieces/Year

Product Description

Pneumatic valve

Application:
This type of reversing valve is used in the material flow switching of equipment pipelines, and is widely used in food, brewing,  Beverage,  dairy products, toothpaste cosmetics, bio-pharmaceutical and other industries.
Advantages:
Sanitary cut-off / conversion valve, with more safety, cleanliness, durability and aesthetics.
With an open bracket that separates the pneumatic head from the valve body, the shaft seal can be checked directly.  This design separates the transmission of the valve from the product part, preventing heat transfer from the valve body to the pneumatic device.
Valve "often closed" and "often open" functions can be changed instantly.
The spherical valve body has ideal fluidity, and the cleaning property is more mild for the handling of materials.
The standard valve design makes the connection combination with a high degree of flexibility and diversity.
The metal stops to ensure a longer sealing life.
Fast and convenient assembly and maintenance operation.
Working principle:
This model uses compressed air to push the piston in the pneumatic actuator up. The piston rod and the valve stem are connected by a positioning card. At the same time, when the air compression pushes the piston in the pneumatic actuator up, the valve stem is moved upwards to make the valve move. The upper sealing surface is pressed against the upper sealing surface of the valve body, that is, the upper valve port is closed. When the air compression is lower than the spring force or no gas compression, the piston is pushed by the spring under the action of the spring, and the valve stem is moved downward to close the lower valve port. It is mainly used for fluid switching in the pipeline system, and is switched in one way and two ways, and is applied to the piping system without pollution or mixing.

Certification	ISO9001
Specifications	1/2"~4" DN10~DN100
Connection method	Welding, clamp, thread, flange
Maximum working pressure	≤10bar
Supply compressed air	4-8bar
Compressed air connection	Air pipe joint G1/8"
Working temperature	-10 ° C to 120 ° C
Contact with material	SS304/SS316L
Internal surface contact product	Ra≤0.8μm
Sealing	Silicone,EPDM,Viton
Surface treatment:
Outside	Sandblast Ra≤1.6μm
Sublight Ra≤0.8μm
Inside	Polish Ra≤0.4μm
Requirements for compressed air quality that the.
Compressed air joint	Air pipe equiped equips with air adapter G1/8"
Max grain size	0.01MM
Max oil content	0.08PPM
Dew point	Below 10ºC or less
Max water content	7.5g/Kg